Fitting And Removing The Hammock; Using The Parking Brake - Be Cool Bandit Manual Del Instrucciones

GB
1
TO OPEN STROLLER FRAME
A. When you fold the stroller,the folding latch will lock into position automatically.
B. Releawse the folding latch by pulling out with one hand.
C. Grip the handle and lift up to unfold the stroller with the other hand.
TO ASSAMBLE AND DISASSEMBLE FRONT WHEELS
2
Insert front wheel set peg into the plastic base until hear a "Click" (2 a). To disassemble:
Press down the button on the plastic base and pull the wheel set out (2 b).
TO ASSEMBLE THE REAR WHEELS
3
Align the cog hole with axle, push into until hear a "Click". To disassemble: Press the button
and pull out the wheel.
4
TO ASSEMBLE THE CANOPY
Align the holes on the canopy fixture with the fixing rivets on the handles. Press the fixture
onto the handles.
5

FITTING AND REMOVING THE HAMMOCK

Your BANDIT is fitted with the pro-fix system. With this system, the hammock can be
attached perfectly to the chassis (5 a). To take the hammock off, simultaneously pull the
unlocking levers situated on both sides of the hammock (5 b). What's more, the hammock is
reversible so it can be positio ned facing you or facing forwards
6
TO ASSEMBLE BUMPER BAR
Assemble: Align the bumper bar pegs with holes in the front of seat unit and insert into
until hear clicks.
Disassemble: Press down both buttons on bumper bar and pull out.
7
USING THE FRONT SWIVEL WHEELS
Push the locking lever upwards so the wheels turn (7A). To lock the wheels again press the
button (7B).
8

USING THE PARKING BRAKE

PUTTING THE BRAKE ON: Push the lever downwards. (8 a)
TAKING THE BRAKE OFF: Pull the lever upwards. (8 b)
TO ADJUST FOOT REST
9
Press down both round buttons to adjust foot rest.
10 TO ADJUST SEAT UNIT
Press in the button to adjust seat unit with 3 positions.
11
TO USE RESTRAINT SYSTEM
To unlock buckle,press in on center button and pull harness out from each side.
To lock buckle,push each side of harness back into buckle until each clicks in place.
Press down the button on handle centre to adjust height.
12
It is 3 position available.
12