Troubleshooting; Accessories; Eu Declaration Of Conformity - Festool EAA Manual De Instrucciones Original

14

Troubleshooting

Electrical faults
No power at perma-
nent socket
No power at automatic
socket
Slide does not open
when electric power
tool is plugged in
Slide does not close
when electric power
tool is plugged in
Selector switch set to
manual: extractor
does not start
Extractor / turbine
operating but slide
does not open
Electric power tool
does not start
15

Accessories

The order numbers of the accessories and
tools can be found in the Festool catalogue or
on the Internet under "www.festool.com".
Action
Check the mains cable connection on the EAA
Check the mains cable connection at the mains
socket
No fault identified
Check the mains cable connection on the EAA
Check the mains cable connection at the mains
socket
No fault identified
Check the control cable at both ends
Open the rear panel and check the solenoid/con-
trol cable and reed contact
Check the compressed air connection
No fault identified
Check the control cable at both ends
Open the rear panel and check the solenoid/con-
trol cable and reed contact
Check the compressed air connection
No fault identified
Check whether the control cable is connected at
both ends
Check whether the extractor/turbine mains cable
is connected
No fault identified
Check whether the control cable is connected at
both ends
Check the flow pressure, min. 4 bar
No fault identified
Check whether the selector switch is set to Auto
Check whether the mains cable is connected
Check whether the electric power tool is faulty
No fault identified
16 EU Declaration of Conformi-
ty
Energy box
EAA EW CT/SRM/M
EAA EW TURBO/M
EAA
GB
Service
Request assis-
tance
Request assis-
tance
Request assis-
tance
Request assis-
tance
Request assis-
tance
Request assis-
tance
Request assis-
tance
Serial no.
495910, 495912
495900, 495902
25