JUKI MO-6 14/LB-6 Serie Manual De Instrucciones página 77

(2) Changing procedure under the normal mode
2
1
3
4
1) Turn ON the power.
Symbols of " - " are displayed under the displays
of A, B, C, and D.
2) Calling of the setting mode
Press switch 2.
The display is changed over as shown in the fig-
ure, and changed over to the display of the num-
ber of stitches of each process (display C). Fur-
ther press switch 2 and the display is changed
over to U1.1 / U1.2 / U1.3.
The sewing machine does not operate at
the time of this display.
3) Change of the set value
Press switch 3 or 4 to change the set value
between 0 to 999.
4) Determination of the contents
Press switch 1. The changed contents can be
determined by the switch operation, and the dis-
play returns to the normal display.
When the power is turned OFF on the way, the
contents cannot be updated. When the display
returns to the normal display, the pedal opera-
tion or the like becomes effective.
23