Installing The Pneumatic Components; Installing The Air Regulator - JUKI MO-6 14/LB-6 Serie Manual De Instrucciones

$ . INSTALLING THE PNEUMATIC COMPONENTS

When assembling the pneumatic components, it is effective to prevent air leak by winding the seal tape on
the screw portion of the joint or the like.

1. Installing the air regulator

WARNING :
To protect against personal injury due to abrupt start of the machine, conduct maintenance works with
the power turned off.
OUT
5
3
OUT
IN
6
24
2
1
4
IN
ø4.6
1
Attach mounting base 2 ,gauge 3 , and joints
1)
4 and 5 to air regulator 1 .
2) Drill two holes of ø4.6 in the side strut of the stand,
and install air regulator 1 using tapping screws
6 .