In The Case Of Using The Sc-510 - JUKI MO-6 14/LB-6 Serie Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 203

2. In the case of using the SC-510

1. When the chain-off thread is not neatly rolled in :
1 Making the state of soft-chains of the chain-off thread
2 Increasing the pressure of chain-off thread presser spring
3 Increasing the number of stitches to be sewn with tension released for start
4 Decrease the slow-start sewing speed.
5 Increasing the number of stitches of the slow start
2. When the needle thread tension is released at the start of sewing
1 Decreasing the number of stitches to be sewn with tension released
2 Decrease the slow-start sewing speed.
3 Increasing the number of stitches of the slow start
Chain-off thread can be neatly rolled in the seam at the start of sewing by releasing the
thread tension for one or two stitches.
Other items to be checked :
1 The mode is set to the chain-off rolling-in mode ?
2 Slow start is set ?
3 Chain-off presser plate is rising ?
4 Thread tension plate normally works without friction ?
5 Material to be sewn is pushed under the upper knife as far as it will go ?
Items to correspond to the trouble
Ref. page
p.41
p.42
p.19 , 23
p.19 , 21
p.19 , 21
p.19 , 23
p.19 , 21
p.19 , 21
p.19 to 23
p.19 to 23
p.44
p.26 , 32
p.35
47

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mo-6 14r/lb-6 serie

Tabla de contenido