Product Description; Structure And Function - geberit ECO 301 Manual De Operación

Product description

Structure and function

The Geberit pressing tool ECO 301 consists of:
• pressing tool with operating instructions
• pressing jaws with compatibility mark or adapter jaws and pressing collars with compatibility
marks
• "General safety notes for electric tools" document
• transport case
The equipment may vary depending on the scope of delivery.
Item Designation
no.
1 Pressing tool
2 Stop button
3 Green LED
4 Red LED
5 Start button
6 Pressing attachment
7 Retaining pin
8 Roller drive
18014400405789195-1 © 02-2018
968.400.00.0 (00)
Function/description
–
• Switches the motor off.
• Clears the fault indicator.
• Lights up: tool is ready for operation.
• Flashing: malfunction → See "Rectifying malfunctions",
page 30.
Lights up or flashes: malfunction → See "Rectifying
malfunctions", page 30.
Long press (> 2 sec.): starts the pressing procedure; the
press connection is established automatically.
• The pressing jaw or pressing collar with adapter jaw
corresponds to the diameter of the pressfitting.
• Pressing attachment with warning note sticker.
Holds the pressing attachment in place.
Transfers the press capacity from the pressing tool to the
pressing attachment.
EN
25