Fulgor Milano FCLH 9008 ID WT Installación Uso Y Mantenimiento página 31

Power levels
The power of the cooking zones can be adjusted on 9 levels
+ Boost (P) (1-9, + P). After selecting a cooking zone, a slider
appears on the lower edge of the display.
The cooking level is selected by directly touching the required
number on the slider or by sliding to the required number.
When you lift your finger, the cooking level is set.
Booster function
All the inductive cooking zones have a booster function (P).
If the booster is activated, the generator supplies significantly
more power than the rated power to a cooking zone. The
booster function allows the user to heat food extremely quickly
and can therefore help save time.
Activating the booster:
The booster is activated by touching the highest cooking level
(P) in the slider area.
While the booster is active, a "P" appears on the cooking zone
display. If it is not possible to activate the booster function (for
example due to temperature limits) the P flashes for 3 seconds
and the booster function is then deactivated.
When the booster function is active, a possibly active automatic
heating time is ended and the power level is set to maximum
power in order to ensure that the rated power is applied after
the booster is deactivated.
The booster function of each cooking zone can be activated
for a limited time of 10 minutes. If the pan is removed from
a cooking zone with the booster function active, the booster
function will not be deactivated but the booster time counter will
continue to operate and will not stop. The booster function can
be reactivated if the booster time limitation has deactivated the
booster, provided the thermal conditions allow it. The thermal
conditions are controlled both via the induction and the user
interface.
To view the deactivation of the booster, the cooking zone
display starts to show a flashing P three seconds before
deactivation.
Deactivating the booster:
If the booster function is active, reducing the cooking level
deactivates the booster function.
Automatic boiling function
When the automatic boiling function is activated, the cooking
zone power is brought to 100% for a period of time depending
on the selected cooking level.
As soon as the boiling time has finished, the cooking level
continues at the previous cooking level.
The boiling times are shown in the table below.
Cooking level
0
1
2
3
4
5
6
7
8
9
Activating automatic boiling:
• The Touch Control must be switched on and a cooking zone
selected.
• Automatic boiling is activated by keeping your finger
pressed on the desired continuous cooking level (between
level 1 and 8) for 2.5 seconds.
Automatic boiling function
(minutes)
0
0.8
2.4
3.8
5.2
6.8
2.0
2.8
3.6
0.25
EN
9