Before And After Fitting - signia Styletto Connect Guía De Instrucciones

Before and after fitting
You have to prepare the hearing instruments before you
can start fitting.
Assembling
A power cell is installed in every hearing instrument on
X
delivery. There is no need to insert a battery.
The receiver unit is permanently attached to the
X
hearing instrument. There is no need to install a
receiver unit.
Activating
Before first use or first fitting you have to activate the
hearing instruments. Place the hearing instruments in the
charger (if they are not already inserted) and press the
charger's button until the first green LED lights up.
Note:
●
Hearing instruments that are activated and not used
may discharge faster than hearing instruments that
have not been activated. Only activate the hearing
instruments before first use or first fitting.
4
Charging
Charge the hearing instruments for at least 15 minutes
before a first fitting session.
Fully charge the hearing instruments before delivery
to the client. A full charging cycle takes approximately
4 hours.
Follow the operating conditions in both the hearing
instrument's and the charger's user guide.
Connecting
Use Noahlink Wireless to fit the hearing instruments
wirelessly.
Noting the serial number
The serial number is printed on the
housing.
5