Optika Italy IM Serie Manual De Instrucciones página 24

9. Open the lamp housing using the door lock screw ①
and remove the lamp holder. (Fig. 26)
10. Remove the plastic block ② from the lamp holder (or the
exhausted lamp in case of replacement) by loosening
the two locking screws ③. (Fig. 27)
11. Insert the mercury bulb ④ (respect the polarity of the
bulb), tighten the locking screws and refit the lamp
holder inside the lamp housing. (Fig. 28)
• Do not touch the bulb with bare hands.
12. Connect the cable from the external power supply to
the lamp housing. (Fig. 29)
Page 24
①
F F ig. 26 ig. 26
③
②
③
F ig. 27 F ig. 27
④
F ig. 28 F ig. 28
F F ig. 29 ig. 29