Optika Italy IM Serie Manual De Instrucciones página 25

13. Connect the power cable to the external power supply.
(Fig. 30)
• The input voltage for fluorescence power
supply is 110-240Vac.
• Please use the standard power cable pro-
vided. Select suitable one when missing
or damaged.
• Connect the power supply correctly, be
sure to have a good earth connection.
• Before connecting the power cord, se-
cure the lamp housing cable to the pow-
er supply.
• If the power cord is connected before,
there may be a risk of electrical shock.
• Disconnect all electrical cables before
installing or replacing the bulb.
• The bulb has an anode and a cathode
of different sizes. Respect the polarity
during assembly.
Page 25
F ig. 30 F ig. 30