Operation - GreenWorks BLV12B00 El Manual Del Propietario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION INSTRUCTION
W A R N I N G
Do not allow familiarity with this product make you careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
W A R N I N G
Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing
protection. Failure to do so could result in objects being thrown into your eyes and other possible
serious injuries.
W A R N I N G
Do not use any attachments or accessories not recommended by the manufacturer of this product.
The use of attachments or accessories not recommended can result in serious personal injury. Before
each use, inspect the entire product for damaged, missing, or loose parts, such as screws, nuts, bolts,
caps,etc. Securely tighten all fasteners and caps and do not operate this product until all missing or
damaged parts are replaced.
APPLICATION
You may use this product for the purposes listed below:
• Blowing Leaves and Debris, Mulching Leaves.
CONNECTING THE POWER CORD (See Figure 7.)
1. Secure the extension cord to the unit by using the cord retainer at the rear of the blower.
2. Make a loop in the extension cord and pass it through the gap at the rear of the blower and
place it over the hook.
3. Plug the female end of the extension cord into the blower power cord.
Figure 7.
Cord Retainer
Power Cord
13

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido