Connecting The System - Pioneer AVIC-F9210BT Manual De Instalación

Section
03

Connecting the system

Connecting the system
Navigation unit
Green
Expansion port
WIRED REMOTE
INPUT
Please see the
Instruction
Manual for the
Wired Remote
Control Adapters
(sold separately).
Vehicle aerial
8
Engb
Power cord
For connection, refer to the wiring and installation
manual separately supplied.
30 cm
Yellow/black
If you use an equipment with mute
function, connect that equipment to the
1 m
Audio Mute lead. If not, keep this lead free
of any connections.
30 cm
Audio source will be set to mute or attenuate, while the
following sounds will not be muted or attenuated. For details,
see Operation Manual.
— voice guidance of the navigation
— incoming ringtone and incoming voice of the mobile
RDS-TMC tuner
Aerial jack
Fuse (10 A)
Note
phone that is connected to this navigation system via
Bluetooth wireless technology
3.55 m
RCA connector
15 cm