Tire Installation And Pressure - Look R38D Manual De Instrucciones

Tire widths range from 700x23 mm to 700x30 mm.
These wheels have been approved with several types of commonly-available tires, however LOOK cannot
guarantee compatibility with all tires available on the current market. We recommend contacting your local
retailer or LOOK customer service to check compatibility. Pay particular attention to the bead of the tires.
Install the tires according to the manufacturer's instructions.
Installing tubeless tires requires special care and assembly verification.
The maximum pressures for cold tires are indicated below.
Should the maximum pressure recommended by the tire manufacturer be inferior to the one indicated
below, do not exceed the manufacturer's value.
Only tires meeting the ETRTO 622X19TC ROAD standard are certified as compatible.
The original tubeless valves have been approved to ensure airtightness between valve and rim.
Black tubeless valve
VALVE CAP
DOUBLE-FLAT
9MM HEX NUT
ALUMINUM BODY
Ø 5,75 MM
MAXIMUM PRESSURES :
23 mm tire - 8 bar
25 mm tire - 8 bar
28 mm tire - 7 ,3 bar
30 mm tire - 6,8 bar
For other tire widths, please contact our LOOK
CYCLE customer service.

TIRE INSTALLATION AND PRESSURE

NON-THREADED SECTION
O-RING
CONICAL RUBBER
VALVE BASE
EN
21