Spoke Tension And Wheel Trueness; Transport And Storage - Look R38D Manual De Instrucciones

EN
Spoke tension is fully adjusted in our factory. After a period of use, and depending on the type of rider, riding
conditions and wheel maintenance, spoke tension may need readjusting. This is best done with your local
retailer.
IMPORTANT : To avoid permanent, irreparable
damage to your rim, spoke tension must not exceed
that of the original factory assembly.
Note that due to the high spoke tension on the
cassette side of the rear wheel, loosening and
tightening the nipples is a delicate procedure.
Always carry your wheels in the protective bags
provided for this purpose, and protect them from any
impacts, knocks and bumps.
Avoid exposing your wheels to high temperatures (in
direct sunlight, behind car windows, on a bike rack
too close to an exhaust pipe, etc.).
Over winter, store your wheels in a dry place and
reassemble the axles before your first ride at the
beginning of the cycling season.
Never hang your bike from the rim or spokes.
24

SPOKE TENSION AND WHEEL TRUENESS

TRANSPORT AND STORAGE

REAR WHEEL TENSION : Do not exceed 130 kg
for spokes on the cassette side.
FRONT WHEEL TENSION : Do not exceed 130 kg
for spokes on the brake rotor side.