Assembly; Parts List; Assembling The Stand - Louisiana Grills LGK13 Montaje Y Operación

PARTS LIST

Prior to assembly, check all parts against the parts list. Carry out
assembly on a soft surface to avoid scratching the unit. Remove all
packaging before use, but retain the safety instructions and store
them with this product. Ensure that the lid is closed prior to assembly.
NOTE: Do not over-tighten bolts. Only tighten all bolts with moderate
pressure to avoid damaging the bolts or components of the ceramic
charcoal barbecue.
Part Qty Description
1 2 Brace Ring
2 3 Bracket
3 1 Cooking Grid
4 1 Charcoal Plate
5 1 Firebox
6 1 Ceramic Body
7 1 Lid Handle
A 24 Bolt
B 24 Dome-headed Nut
C 24 Locking Washer
D 24 Washer
*Please note: Due to ongoing product development, parts are subject to
change without notice. Contact Customer Service if parts are missing when
assembling the unit.

1. ASSEMBLING THE STAND

Parts Required:
2 x Brace Ring
3 x Bracket
24 x Bolt
24 x Dome-headed Nut
24 x Locking Washer
24 x Washer
Installation :
• Attach one bracket to each brace ring by inserting the bolts
into the holes (facing out) and securing with a washer,
locking washer, and dome-headed nut. Note the order
illustrated in diagram.
• Continue to attach the other two brackets to the brace rings
using the same method. This will complete the stand.
• Once all three brackets are attached, use a wrench to
tighten all nuts. Ensure the stand is placed on a level surface
when tightening.

ASSEMBLY

A
B
C
D
7
4
2
1
3
5
6
8