Brita PURITY 450 Steam Manual página 30

•
Press and hold the button (> 4 seconds and
< 10 seconds) until the parameter input for the filter
system type and size flashes.
•
Press and hold the button (> 2 seconds) until the filter
system type (STD, STM, FIN) and corresponding value
for the filter system size (04, 06, 12) has been reached.
•
Press the button once (< 1 second) to access the next
parameter input unit of hardness. The unit of hardness
flashes.
•
Press and hold the button (> 2 seconds) until the
desired unit of hardness has been selected.
•
Press the button once (< 1 second) to access the next
parameter input hardness value. The hardness value
input flashes.
•
Press and hold the button (> 2 seconds) until the value
EN
for the water hardness rises and keep it pressed until
the desired value has been reached.
•
Press the button (< 1 second) to access the next
parameter input monthly limit. The monthly limit input
flashes.
•
Press the button (> 2 seconds) and keep it pressed
until the desired value has been reached.
The set parameters can now be accepted.
If you want to accept the parameters, proceed as follows:
•
Press the button once (< 1 second) until the message
"Reset" appears and flashes.
26
> 4 sec
> 2 sec
< 1 sec
> 2 sec
< 1 sec
> 2 sec
< 1 sec
> 2 sec
< 1 sec