Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
11.4 USING FIXING SYSTEMS
To use the vertical or horizontal FIX Board fixing sy-
stems, place the handles of the spine board on the
fixing system hooks, push the spine board against
the wall, then secure it by turning the special stops.
To attach the baby go spine board, insert the clips
of the wall bracket into the central handles where
the clips are located, then turn the red clips of the
fixing system.
12. CLEANING AND MAINTENANCE
Spencer Italia S.r.l. declines all responsibility for any direct or indirect damage which is the consequence of improper use of the product and spare parts and/or in any
case of any repair carried out by a person other than the Manufacturer, who uses internal and external technicians authorised to do so; moreover, doing so will invalidate
the warranty.
• The operator must wear suitable personal protective equipment, such as gloves, goggles, etc. during all checking, maintenance and cleaning operations.
• Establish a maintenance schedule, periodic inspections and extend the average life span, if foreseen by the Manufacturer in the User Manual, identifying a reference person
who meets the basic requirements set forth in the User Manual.
• The frequency of inspections is determined by factors such as legal requirements, type of use, frequency of use, and environmental conditions during use and storage.
• Repairs of products manufactured by Spencer Italia S.r.l. must be carried out by the Manufacturer, who shall make use of specialised internal or external technicians
who, using original spare parts, shall provide quality repair service in strict compliance with the technical specifications indicated by the Manufacturer. Spencer Italia S.r.l.
declines any responsibility for any direct or indirect damage which is a consequence of improper use of spare parts and/or any repair work carried out by unauthorised
parties.
• All maintenance and overhaul activities must be recorded and documented with the relevant technical operation reports. This documentation must be kept for at least 10
years after the end of the product's life and must be made available to the competent authorities and/or the Manufacturer when requested.
• Cleaning, provided for reusable products, must be carried out in accordance with the Manufacturer's instructions in the User Manual in order to avoid the risk of cross-in-
fection due to the presence of body fluids and/or residues.
IT
• If required, the product and all its components must be washed and left to dry completely before storage.
12.1 CLEANING
Failure to carry out the correct cleaning operations could increase the risk of cross-infection due to presence of body fluids and/or residues.
The operator must wear suitable personal protective equipment, such as gloves, goggles, etc. during all checking and cleaning operations.
EN
Clean the exposed parts with water and delicate soap. Never use solvents or stain removers.
Rinse thoroughly with lukewarm water, making sure you have removed all traces of soap, which may deteriorate or compromise conditions and durability. Avoid using high
pressure water, as it penetrates the joints and removes lubricant, creating the risk of corrosion on components. Let dry completely before storing. Drying after washing or after
use in a wet environment must be natural and not forced. Do not use flames or other direct heat sources.
After complete drying, proceed with lubrication as described below.
DE
If disinfecting, use products that do not have a solvent or corrosive action on materials constituting the device, in addition to being classified as medical-surgical devices.
Carefully follow the instructions of the manufacturer of the product used with regards to the application method and contact time.
Be sure to take all precautions to ensure that there is no risk of cross-infection or contamination of patients and operators.
12.2 ROUTINE MAINTENANCE
FR
You must establish a maintenance program and periodic checks, identifying a designated reference person. The person entrusted with device maintenance must ensure
the basic requirements envisaged within this user manual.
All routine and special maintenance activities and all general overhauls must be recorded and documented with the relevant technical intervention reports. This
documentation must be kept for at least 10 years after the end of the device's life and must be made available to the competent authorities and/or the Manufacturer
when requested.
ES
The operator must wear suitable personal protective equipment, such as gloves, goggles, etc. during all checking, maintenance and cleaning operations.
The maintenance schedule must comply with the following table:
MINIMUM MAINTENANCE INTERVALS
PT
Disinfection
Cleaning
Inspection
EL
The inspection to be carried out after each use involves:
• Check that all components are present
• Check device conditions – There must be no cracks, fissures, holes or cuts.
• Check conditions of wear – There must not be any level of abrasion that would compromise the safety of the product, for example the thinning of one or more of its parts.
• Check that the moving parts slide properly.
CS
• Check if the pins, if present, are intact and firmly in place.
• General check of the state of wear of each component.
• Check that all the accessories provided are present, functional and intact.
• Disinfection – Par. 12.1
Use only original or Spencer Italia S.r.l. approved components/replacement parts and/or accessories to carry out any operation without causing alterations or modifications
to the device. Otherwise, we decline all responsibility regarding incorrect operation or any damage caused by the device to the patient or the operator, invalidating the
warranty and invalidating compliance with EU Regulation 2017/745.
12.3 PERIODIC OVERHAUL
No periodic overhaul is foreseen for the device.
12.4 SPECIAL MAINTENANCE
Special maintenance can only be carried out by the Manufacturer, who uses internal and external technicians specialised and authorised by the Manufacturer itself.
Only maintenance activities carried out by specialised technicians authorised by the Manufacturer are considered valid by Spencer Italia S.r.l..
The end-user can replace only the spare parts indicated in § 15.
18
AT EACH USE
IF NECESSARY
●
●
MONTHLY
●
●
●
Publicidad
Tabla de contenido
