Audio Settings And Video Adjust Menus; Audio Settings Menu; Virtual Surround; Audio Drc - Pioneer DV-600AV-S Manual De Instrucciones

07

Audio Settings and Video Adjust menus

Chapter 7
Audio Settings and Video
Adjust menus

Audio Settings menu

The Audio Settings menu offers features for
adjusting the way discs sound.
1 Press HOME MENU and select 'Audio
Settings' from the on-screen display.
2 Select and change settings using the
(cursor) buttons, and ENTER.
Audio Settings

Virtual Surround

Audio DRC

Dialog
DV-600AV screen
Audio DRC
• Settings: High, Medium, Low, Off
(default)
When watching Dolby Digital DVDs at low
volume, it's easy to lose the quieter sounds
completely—including some of the dialog.
Switching Audio DRC (Dynamic Range
Control) to on can help by bringing up the
quieter sounds, while controlling loud peaks.
How much of a difference you hear depends
on the material you're listening to. If the
material doesn't have wide variations in
volume, you may not notice much change.
36
En
Audio Settings
On
Off
Note
• Audio DRC is only effective with Dolby
Digital audio sources.
• Audio DRC is only effective through the
digital output when Digital Out is set to
On, and Dolby Digital Out is set to Dolby
Digital > PCM (see Digital Audio Out
settings on page 39).
• The effect of Audio DRC also depends on
your speakers and AV receiver settings.
Virtual Surround
• Settings: On, Off (default)
Switch on Virtual Surround to enjoy realistic
surround sound effects from just two
speakers.
Tip
• You can also use the SURROUND button
on the remote control to switch Virtual
Surround on.
Note
• 96 kHz linear PCM audio is automatically
downsampled to 48 kHz if Virtual Surround
is switched on.
• DV-600AV only: The Audio Output Mode
(see page 45) must be set to 2 Channel in
order to be able to use Virtual Surround.
• If the player is outputting Dolby Digital,
DTS or MPEG bitstream audio (in other
words, no conversion to PCM), Virtual
Surround has no effect on the audio from
the digital output. See Digital Audio Out
settings on page 39 for how to set up the
digital output formats.