Setting The Tv System; Resetting The Player; Dvd-Video Regions - Pioneer DV-600AV-S Manual De Instrucciones

Additional information

Setting the TV system

The default setting of this player is AUTO, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to AUTO. If you experience picture distor-
tion with some discs, set the TV system to
match your country or region's system. Doing
this, however, may restrict the kinds of disc
you can watch. The table below shows what
kinds of disc are compatible with each setting
(AUTO, PAL and NTSC).
1 If the player is on, press
ON to switch it to standby.
2 Using the front panel controls, hold
down then press
switch the TV system.
The TV system changes as follows:
• AUTO NTSC
• NTSC PAL
• PAL AUTO
Note
• You have to switch the player into standby
STANDBY/ON) before each
(press
change.
Disc
Type Format NTSC PAL AUTO
DVD/Super NTSC
VCD/Video CD/
DivX Video/
PAL
WMV
CD/MP3/WMA/
MPEG-4 AAC/
—
JPEG
no disc
STANDBY/
STANDBY/ON to
Player setting
NTSC PAL NTSC
NTSC PAL PAL
NTSC
NTSC PAL
or PAL

Resetting the player

Use this procedure to reset all the player's
settings to the factory default.
1 Switch the player into standby.
2 Using the front panel buttons, hold
down the (stop) button and press
STANDBY/ON to switch the player back
on.
All the player's settings are now reset.

DVD-Video regions

All DVD-Video discs carry a region mark on the
case somewhere that indicates which
region(s) of the world the disc is compatible
with. Your DVD player also has a region mark,
which you can find on the rear panel. Discs
from incompatible regions will not play in this
player. In this case the attention sentence
Incompatible disc region number Can't
play disc is displayed on screen. Discs
marked ALL will play in any player. The
diagram below shows the various DVD regions
of the world.
1
2
4
5
1
6 2
3
5
2
4
09
53
En