After Spraying; Storing The Machine - Stihl SG 31 Manual De Instrucciones

English
Put the strap over your left shoulder
N
so that the unit hangs at your side.
Operate the gun and always pay
N
attention to the optimal working
pressure while spraying.
If the working pressure drops more
N
than 0.5 bar (7.25 PSI) , restore it by
operating the pump handle.
12

After Spraying

Release pressure in solution
N
container.
Unscrew the pump from the
N
container.
Drain the container in a well-
N
ventilated location – collect remaing
solution in a suitable container.
Dispose of any residual spray solution in
accordance with environmental
requirements – follow instructions of
chemical manufacturer.
Rinse the container with clean
N
water.
Fill the solution container with clean
N
water, pump and spray until the
container is empty and completely
depressurized.
Wipe down the whole unit with a
N
damp cloth.

Storing the Machine

Keep solution container and pump
N
separate for drying and storage.
Dry the unit and store it in a place
N
protected from direct sunlight and
frost.
SG 31