Spraying; Storing The Machine - Stihl SG 20 Manual De Instrucciones

English

Spraying

Before Spraying
Oil the pump piston (1).
N
2
Oil the spray gun's valve plunger
N
(2).
Put the unit on your back.
N
Operate the hand lever (2) slowly
N
and steadily with the gun closed – 8
to 10 strokes are required to build
up pressure.
10
Spraying
Pull the spray gun's trigger (1).
N
Operate the hand lever 3 to 6 times
N
per minute to maintain a uniform
spray pressure.
Rotate the nozzle (2) to adjust the
N
spray pattern.
For continuous operation:
Pull the trigger.
N
Engage the U-clip (3) in direction of
N
the arrow – the trigger is locked.

Storing the Machine

Empty the tank in a well-ventilated
N
location.
Dispose of any residual spray
N
solution in accordance with
environmental requirements –
follow instructions of the chemical
manufacturer.
Rinse the tank with clean water.
N
Fill the tank with about 1 1/4 gal.
N
(5 liters) of clean water, pump and
spray until the tank and hose
system are empty and no longer
under pressure. Do not store the
sprayer under pressure or with
spray solution in the tank.
After finishing work, clean the
N
filter (1) in the spray gun.
Allow the unit to dry with the cap
N
removed.
Store the unit in a dry place
N
protected from frost.
SG 20