Factory Default - Doro HandleEasy 330gsm Manual Del Usuario

Keylock
The automatic Keylock function can be set to be
disabled, or activated after 30 Seconds or 60
Seconds of inactivity in standby mode.

Factory Default

Resets the telephone to the factory settings.
Note!
The phone lock password is required to access
the Factory Default setting. The default phone lock
password is "0000".
Note!
The Emergency number for the Alarm Call Key has to
be reprogrammed after a Factory Default reset. Phone
book entries and SMS messages are not affected.
Alarm (Emergency) Call Setting
2
Alarm number
Enter the phone number to be dialed by the Alarm
(Emergency) Call Key and press q to confirm.
Delay setting
Sets the time delay before the Alarm number is
dialed after pressing the Alarm Call Key.
Select 3 Seconds, 5 Seconds or 8 Seconds and
press q to confirm.
English English