Product Information; Voltages; Possible Versions; Materials Used - Nordcap Moretti Forni iR 260 - iLab Manual Instrucciones

2 - PRODUCT INFORMATION

After sales support: contact the retailer.
All machine data are outlined on the serial number :

2.1 VOLTAGES

All the machines are supplied as standard with a 400 Volt 50 Hz 3 phase connection.
On request: different voltages can be manufactured.

2.2 POSSIBLE VERSIONS

See technical data table on page 16

2.3 MATERIALS USED

Frame in electro-welded, painted or galvanised steel;
.Coating in painted steel or stainless steel.
.Heads in MG5 Anticorodal aluminium with anodising;
.Knives in stainless steel AISI 304;
.Shaping plates in polyethylene for foodstuff use PETG;
.Head ring in aluminium with chemical nickel-plating;
.Oil for hydraulic control unit: H32.
N.B.: all parts in contact with the product are suitable for the food industry
UK/3