How The Command Keypad Works; Work Program Selection; Changing The Working Times - Nordcap Moretti Forni iR 260 - iLab Manual Instrucciones

7.4 HOW THE COMMAND KEYPAD WORKS

7.4.1 WORK PROGRAM SELECTION

To select the program to work with, keep the knob pressed for 3 seconds (the display
highlights relating to the program); turn the knob to the right or left to increase or decrease the
program number. Once the work program is chosen, confirm by pressing the knob once.

7.4.2 CHANGING THE WORKING TIMES

To change the working times, keep knob "e" pressed for 3 seconds (the program number is
highlighted). Select the program number, keep the knob to change the individual working
times pressed for another 3 seconds with the procedure described below.
t 1 (pressing time) *
The relevant
highlighted.
Turn the knob to the right or left
to increase or decrease the
value.
Once the desired value is set,
press the knob once.
At this point, the machine returns to display the program (all the values are highlighted) and is
ready for the working cycle with the selected program. See figure below
display is
t 3 (shaping chamber) ***
The
highlighted.
Turn the knob to the right or left
to increase or decrease the
value.
Once the desired value is set,
press the knob once.
UK/10
relevant display is