Assembling The Unit; Harness - Stihl SG 20 Manual De Instrucciones

English

Assembling the Unit

Connect the wand (1) to the spray
N
gun (2).
Secure the nozzle holder (3) to the
N
wand (1).
8
4
Mount the hand lever (4) with the
N
screws (5).
After completing assembly, do a test run
with clean water to check the sprayer for
leaks – do not use the sprayer if it is
leaking.

Harness

5
5
Adjust the harness straps so that
N
the backplate fits snugly and
securely against your back.
SG 20