Scope Of Delivery - AL-KO AMS2 Guia Del Usuario

Scope of delivery

1 1x Cable harness
2 1x Assembly spanner
We recommend having all installation work carried out only by competent specialist workshops or
ADVICE
our AL-KO Service Centres.
Removal of cable harness
1. Bring the caravan to a convenient working height and secure it.
2. Disconnect the supply battery.
3. Short-circuit the positive and negative cables of the drive for discharging the drives (1a).
4. Remove all fuses, disconnect plugs and cables from the fuse holder (1b).
5. Equalise the potential.
To do this, briefly touch the drive with your finger (2)
6. Open locks of the service openings (3).
7. Unscrew union nuts on the cable screw connection (4).
8. Unscrew and remove the middle cable screw connection (5).
9. Pull the cable out carefully until the screw connection is visible (6).
10.Disconnect the plug (pay attention to the lock!) and secure it to prevent it slipping in (7).
11. Release the ring lug from the printed circuit board.
12.Unscrew and remove the cable screw connection from the battery cable (red/black).
13.Pull out the battery cable.
The screw remains on the cable harness.
Cable harness installation
1. Place the new cable harness ready.
2. Equalise the potential.
To do this, briefly touch the drive with your finger (2)
1652108_b
1
XXXXX
XXX
4
2
3
3 2x Plug
4 1x Instructions
en
7