Safety Information; Declaration Of Conformity - EdilKamin IDROFLEXA Instalación Uso Y Mantenimiento

SAFETY INFORMATION

THE BOILER-STOVE MUST NEVER BE MADE TO
OPERATE WITHOUTWATER IN THE SYSTEM NOR AT
A PRESSURE OF LESS THAN 1 BAR. IT CAN BE DA-
MAGED IF IT IS IGNITED WITH NO WATER IN THE
SYSTEM.
• The boiler-stove is designed to heat water by means of auto-
matic combustion of pellets (wood with 6 mm diameter) in the
hearth.
• The only risks that may derive from using the boilerstove
pertain to non-compliance with the installation regulations,
direct contact with live electrical parts (internal), contact with
the fire or hot parts, or foreign substances being put into the
boiler-stove.
• Should components fail, the boiler-stove is equipped with
safety devices to guarantee its automatic shutdown.
• These are activated without any intervention required.
• In order to function correctly, the boiler-stove must be instal-
led in accordance with the instructions given herein.
• Whilst functioning, the door must never be opened. In fact,
combustion is fully automatic and requires no manual interven-
tion.
• Under no circumstances should any foreign substances be put
into the hearth or the hopper.
• Do not use flammable products to clean the smoke channel
(the flue section connecting the boiler-stove smoke outlet to the
chimney flue).
• Hearth and hopper components must only be cleaned with a
vacuum cleaner.
• The glass can be cleaned when COLD with a suitable product
(e.g. GlassKamin) and a cloth. Do not clean when hot.

declaration of conformity

The undersigned EDILKAMIN S.p.a. with head office headquarters at Via Vincenzo Monti 47 - 20123 Milan - Italy - VAT IT00192220192
Declares under its own responsability as follows:
The wood pellet boiler-stoves specified below is in accordance with the 89/106/EEC (Construction Products)
Wood pellet bolier-StoveS, trademark edilKamin, called idrofleXa
year of manufacture: ref. data nameplate
Serial number: ref. data nameplate
The compliance with the 89/106/EEC directive is besides determined by the compliance with the European standard: uni en 14785:2006
The wood pellet boiler-stove IDROFLEXA is in compliance with the requirements of the European directives:
2006/95/EEC - Low voltage directive
2004/108/EEC - Electromagnetic compatibility directive
edilKamin S.p.a. will decline all responsability of malfunctioning or damage to the equipment in case of unauthorized
substitution, assembly or modifications of any sort on the said equipment on the part of non-edilKamin personnel.
• Ensure that the boiler-stoves are installed and ignited by a qua-
lified Edilkamin DEALER, in accordance with the
instructions given herein.
• When the boiler-stove is in operation, the exhaust pipes and
door become very hot (do not touch without wearing the thermal
glove).
• Do not place anything, which is not heat resistant near the
boiler-stove.
• NEVER use liquid fuel to ignite the boiler-stove or rekindle
the embers.
• Do not obstruct the ventilation apertures in the room
where the boiler-stove is installed, nor the air inlets of the
boiler-stove itself.
• Do not wet the boiler-stove and do not go near electrical
parts with wet hands.
• Do not use reducers on the smoke exhaust pipes.
• The boiler-stove must be installed in a room that is suitable for
fire prevention and equipped with all that is required (power and
air supply and outlets) for the boiler-stove to function correctly
and safely.
• The boiler-stove must be kept in a room where the temperature
is above 0 °C.
• Use appropriate anti-freeze additives for the water of the
system.
• Ensure that the temperature of the return water is at least 45-50 °C.
ATTENTION:
• Should ignition fail, do not re-ignite until
you have emptied the combuStion chamber.
• the pellet emptied from the combuStion
chamber muSt not be depoSited inSide the
hopper.
- 3
-