When Connecting The Rear Display; When Using A Rear Display Connected To Rear Video Output - Pioneer AVIC-HD3II Manual De Instalación

Section
02 Connecting the System
When connecting the rear
display
The navigation unit
23 cm
Yellow
(REAR
MONITOR
OUTPUT)
To video input
Rear display with
RCA input jacks
When using a rear display
connected to rear video output
WARNING
NEVER install the rear display in a location
that enables the driver to watch the video
source while driving.
This navigation system's rear video output is for
connection of a display to enable passengers in
the rear seats to watch the video source.
18
Engb
RCA connector 2
15 cm
Red, white
(REAR
MONITOR
OUTPUT)
RCA cables
(sold separately)
To audio inputs
You can switch the rear screen mode in [AV
Source Menu]. (For details, refer to the operation
manual.)
Notes
! The map screen navigation images output to
the rear display differ from standard NTSC for-
mat images. Therefore, their quality will be in-
ferior to the images that appear on the front
display.
! The navigation system automatically switches
the colour system (NTSC, PAL, SECAM) for
each video and outputs the video on the "Rear
Display". To correctly output each type of
video on the "Rear Display", we recommend
using a "Rear Display" with a function to auto-
matically switch the colour system (e.g. AVD-
W7900).