Rear Panel - ESAB Origo Manual De Instrucciones

4.2) Rear panel

4) Connection for the power cable of the welding source.
5) Connector to connect the shielding gas.
6) Socket to connect the control cable.
4.1.3) Spool Gun torch
7) Euro-connector for connection in the front panel of the control unit.
8) Control socket for connection in the front panel of the control unit.
9) Wire speed control potentiometer.
10) Wire feed rollers.
11) Support to install the wire bobbin.
12) Trigger to activate the torch.
8
6
5
4
7
12
9
10
11
17
Origo™ Feed Spool Gun