Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Remove the rollator from its packaging and check that all components are present. Remove all packaging and
protective covers. Make sure all components are in good condition before assembly.
a.
Place the rollator on the floor so that it rests on the back of the frame and the rear wheels.
b.
Insert the front wheels into the frame. The wheels are securely attached when you hear an audible
"click".
c.
Remove the triangular wheels that are located on each side of the rollator.
d.
Insert the handle on the top of the rollator. Be sure to insert both handle tubes at the same time and
at the same height.
e.
When you are satisfied with the handle height, replace the triangular wheels to secure the handle in
place.
NOT-AD-06 Septembre 2020 ( Version 1.1)
9
Publicidad
Tabla de contenido
