Publicidad
PROGRAMMING
EN
The main factory settings are reported in the following.
Factory settings
- Admin password = 0039
- Door station address = 231
- Door lock operation time = 1 sec.
- Auxiliary relay address / operating time = 211 / 1 sec.
To change these settings or to make others, you can download and
use the corresponding DUO System App (available by following
the links below, for Android and iOS smartphones and tablets) after
having connected the push-button panel via Bluetooth.
for Android
https://farfisa.com/qr/and-duo/
for iOS
https://farfisa.com/qr/ios-duo/
For the Bluetooth connection, you need to install the XE2921 or
XE2922 card on TD2000HE.
Alternatively, you can operate TD2000HE manually, as instructed
in the following paragraphs.
Enter programming mode
To enter the programming mode type "00" +
display "Enter code". Enter the administrator password (default
password: 0039) +
, and the programming menu will be displayed.
Exit the programming mode
To exit programming, press key
screen is displayed.
Using the keypad
For manual programming, use the panel keypad.
Entering a text string: When the parameter to be set is a text string
(names, aliases, and welcome messages), keys 1 to 9 allow you
to enter, if pressed several times, digits, uppercase or lowercase
letters (in addition to any special symbols) written on them. For
example, pressing key 2 repeatedly gives the following sequence
of characters: 2, A, B, C, a, b, c. Key 0 allows you to enter 0 or an
empty space. With the
insert the next character, while the
the left, allowing you to make any corrections. Once finished, press
key
and a window will be displayed prompting you to save the
changes. Press key
again to save the changes and go to the
next programming.
Entering a numeric value: When the parameter to be set is a
number (block, address...), once you enter the menu item, press
key
to delete the data inserted, if any, and type in the new
value by pressing keys 0 - 9; press key
displayed prompting you to save the changes. Press key
to save the changes and go to the next programming.
, the screen will
several times until the main
arrow, the cursor moves to the right to
arrow moves the cursor to
and a window will be
PROGRAMMING MENU
In the manual programming mode, the main menu has the follow-
ing items:
- Language
- Users
- System
- Miscellaneous
- Default
Use the
and
to enter a selected function. Use key
Language
Available languages listed:
- Italiano
- English
- French
- Spanish
- Polish
- Danish
- Dutch
- ............
Use the
and
to confirm your selecion. Use key
Users
Sorted list of user names; the list can have two different formats:
- in normal mode, only users who have an associated apartment
name and address will be displayed;
- in programming mode, users who do not have an associated
apartment name and address (such as those who only have a
password) will also be displayed, sorted after the list of those who
have an associated name and address;
Attention: Users must always have one of the fields: apart-
ment address or password.
Use key
to enter this menu, and key
menu.
Items of the menù:
- New
- Lauren Jonathan
- Smith Mary
- ..............
Use the
or
stored contacts and press key
New
Storing the data of a new system user (max 500). If there are al-
ready 500 users in the list, the system will not allow the addition
of a new one. The following data can be entered for each user:
- Name
(Empty by default.) User name, there are 20 characters avail-
able, that can be letters, digits and special characters; see
paragraph Entering a text string to learn how to enter names.
- Block address
(255 by default, not programmed.) System block to which the
user belongs, from 01 to 99; see paragraph Entering a nu-
meric value to learn how to enter addresses. Leave it on 255
or enter 0 if the system is not to be used with block splitting.
- Flat address
(100 by default.) Users must be identified by a unique address
from 001 to 200 (allowed addresses are from 211 to 220 and
they can be used to send an enabling command to an actua-
tor, for example, to turn on lights on the staircase. For this ser-
vice, you need to program the corresponding actuators so that
they can be enabled from the external station). See paragraph
Entering a numeric value to learn how to enter addresses.
again
Set this parameter on 255 if you do not want to associate any
apartment with this contact.
arrows to scroll through functions, use key
to exit programming.
arrows to select the language, use key
to return to the main menu.
arrows to select New or one of the previously
to access the selected item.
to return to the main
Mi 2565
- 14 -
Publicidad
