Inger Volume Switch; Duration Counter; Auto Standby; Flash - GE 27939 Guia Del Usuario

D C
URATION OUNTER
After you press TALK/callback on the handset (or SPEAKER button on the
base), the built-in call duration counter shows on the display and begins
counting the length of time of the call.
A S
UTO TANDBY
Placing the handset in the cradle while the handset is off the hook (during
a call) automatically hangs up the handset.
R V
INGER OLUME
Handset — A two-position switch permits the handset ringer to be turned
off or on.
Base Unit — The base ringer volume is set in the programming menu.
Refer to Telephone Set Up for more information.
The ringer switch must be in the on position for the handset to ring during
incoming calls.
F
LASH
Use the flash/program buttons on the base and handset to activate
custom calling services such as call waiting or call transfer, which are
available through your local phone company.
TIP: Don't use the TALK/callback or SPEAKER button on the cordless
handset to activate custom calling service such as call waiting, or you'll hang
up the phone.
L N
AST UMBER
To redial the last number you dialed:
B U
ASE NIT
1. Press the SPEAKER button.
2. Press the redial/delete button.
If you get a busy signal, and want to keep dialing the number, press the
redial/delete button to quickly redial the number.
S
WITCH
R
EDIAL
15