F
H
ROM THE
ANDSET
1. Make sure the phone is OFF (not in TALK mode)..
2. Press the int button. A paging tone sounds at the base and handset. (To
cancel intercom, press int again.)
3. Wait for the person near the base to press the PAGE/intercom button.
4. When finished, press int on the handset to deactivate the intercom.
A
I
DVANCED
NTERCOM
H
I
ANDLING AN
During an intercom call, if a telephone call comes in, both users are alerted
as follows:
Handset - Receives a ringing tone. To take the call, press TALK/callback.
(The intercom connection is discontinued.)
Base Unit - Speaker rings and the new message/in use indicator blinks. To
take the line, press the SPEAKER button.
U
I
SING
NTERCOM
During a telephone call, you can use the Intercom Paging function to page
the other unit and set up a private (2-way) intercom conversation with
another user, meanwhile placing the telephone call on hold. Or, you can
create a 3-way conversation between the telephone caller, the base unit, and
the handset. You can also transfer the telephone call to the opposite unit.
NOTE: Before intercom paging the other unit, you must decide whether
you want to create a 2-way conversation or a 3-way conversation. To set up a
2-way conversation, you must put the external caller on hold and
intercom/page the other unit. The external user is unable to hear the
resulting intercom conversation.
20
F
EATURES
T
NCOMING
ELEPHONE
W
Y
HILE
OU
C
D
ALL
URING AN
H
T
AVE A
ELEPHONE
I
C
NTERCOM
C
ALL
ALL