Local Area Code Selection; Ringer Level Selection; Ringer Tone Selection - GE 27939 Guia Del Usuario

L A C
OCAL REA
1. Press the flash/program button until " SET AREA CODE - - - " shows in the
display. "- - -" is the default setting.
2. Use the handset or base number pad to enter your three digit area code.
3. Press flash/program to store selection.
NOTE: You can press flash/program to go on to the next feature at any time.
To exit the menu, press flash/program repeatedly.
To clear the local area code, press and release flash/program, until SET AREA
CODE is displayed. Then enter "000." Press flash/program again to confirm.
R L
INGER EVEL
NOTE: This setting is for the base only.
1. Press the flash/program button until " SET RING LEVEL " shows in the
display. " 1 HI " is the default setting.
2. Press 1, 2 or 3 on the base keypad or use the CID review (up or down
arrow) button to scroll to your selection.
3. Press flash/program again to store selection.
NOTE: You can press flash/program to go on to the next feature at any time.
To exit the menu, press flash/program repeatedly.
R T
INGER ONE
1. Press the flash/program button until " SET RINGER TONE " shows in the
display. " 1 " is the default setting.
2. Press 1, 2 or 3 on the handset or base number pad or use the CID review
(up or down arrow) button to scroll to your selection.
3. Press flash/program to store selection.
12
S
ODE ELECTION
S
ELECTION
S
ELECTION