Kobalt SGY-AIR88 Manual Del Usuario página 3

ASSEMBLY INSTRUCTIONS
This spray gun is rugged in construction, and is built to yield
exceptional value. The life of this product and the efficiency
of its operation depend upon the knowledge of its construction,
usage and maintenance. (See Fig. 1)
1. Take out spray gun and put filter on spray gun. (See Fig. 2)
2. Put on paint cup. (See Fig. 3)
3. Connect air tube to air intake connector from air compressor;
set pressure to 60 psi. Fully open air adjustment knob and
adjust the spray pattern adjustment knob to proper range.
(See Fig. 4)
4. Pour paint into paint cup and put on cover. (See Fig. 5)
2
4
Spray Pattern Adjustment Knob
Fluid Adjustment Knob
Air Adjustment Knob
3
5
3
1
Gravity Feed Cup
Fluid Adjustment Knob
Air Inlet
Atomization
Pressure Gauge
Air Hose
Load paint
Oil and
Water
Extractor