Features; Tools Needed - RIDGID GP80145SW Manual Del Operador

FEATURES

PRODUCT SPECIFICATIONS
Air Tank Capacity ....................................................... 8 gal.
Air Pressure .................................................... 145 psi max.
Air Delivery ......................................... 10.2 SCFM @ 90 psi
KNOW YOUR AIR COMPRESSOR
See Figures 1a and 1b, page 19.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting.Before
use of this product, familiarize yourself with all operating
features and safety rules.
CHOKE LEVER
The choke lever is used when starting the engine.
DRAIN VALVE
The drain valve on the tank is for draining condensation to
help prevent tank corrosion.
ENGINE
The engine enables the air compressor to achieve 10.2
SCFM at 145 psi. Please read the engine manual included
with this product.
ENGINE OIL CAP/DIPSTICK
Remove the engine oil cap/dipstick to check and add oil to
the engine when necessary.
ON/STOP SWITCH
The on/stop switch is used in combination with the recoil
starter to start the air compressor. It is also used to turn the
air compressor off.

TOOLS NEEDED

See Figure 2, page 20.
The following tools (not included) are needed for assembling or maintaining the air compressor.
 Adjustable Wrench
 Phillips Screwdriver
Engine.............................................................. 170 cc OHC
Gauges ..........................................................2 in. diameter
Net Weight .............................................................. 194 lbs.
HANDLES
The air compressor is equipped with handles for easy
transport.
PRESSURE REGULATOR KNOB
Use the pressure regulator knob to adjust the amount of
air being delivered through the hose. Pressing down on the
knob will lock it into place. This prevents movement of the
knob caused by vibration during use.
PUMP OIL CAP/DIPSTICK
Remove the pump oil cap/dipstick to check and add oil to
the pump when necessary.
OUTLET PRESSURE GAUGE
The current line pressure is displayed on the regulator
pressure gauge. This pressure can be adjusted by rotating
the pressure regulator knob.
RECOIL STARTER
The recoil starter is pulled to start the machine.
TANK PRESSURE GAUGE
The tank pressure gauge indicates the pressure of the air
in the tank.
QUICK CONNECT COUPLERS
Your air compressor has two 1/4 in. quick connect couplers
located on the control panel.
8 – English