CARE AND MAINTENANCE
All maintenance should only be carried out by a qualified service technician.
Cleaning
Before cleaning or performing any maintenance, remove the battery pack. For safe and
proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean your circular saw; never use detergent or alcohol.
TROUBLESHOOTING
WARNING
Turn the switch to the "OFF" position and remove the battery before performing troubleshooting
procedures.
PROBLEM
Tool does not work.
Blade binds, jams,
or burns the wood
Saw vibrates or
shakes
POSSIBLE CAUSE
Low battery capacity.
1.Improper operation.
2.Dull blade.
1.Improper blade.
2. Improper operation of
installing blade.
CORRECTIVE ACTION
Charge the battery pack.
1. See "OPERATING INSTRUCTIONS"
section.
2.Replace or sharpen blade.
1.Replace blade.
2. Remove the blade and reinstall it, ensure
no part was missed.
19