Festo BAW−HSW−10 Manual Del Usuario página 13

1 User
Pressurisation of the swivel module on the handling
module HSW and, with a time delay, pressurisation of the
double−acting actuating cylinder of the waiting position
BAW−HSW moves the guide rail from the initial position (A)
into the waiting position (B). When the actuating cylinder
is being retracted, the pressurised swivel module pushes
the guide rail into the end position (C).
The waiting position BAW−HSW serves to keep the guide
rail of the handling module HSW in the waiting position.
z
Conditions for the safe use of the product
Observe the specified limits (e.g. pressures, forces,
S
temperatures). Observe the ambient conditions at your
location.
Pressurise your system slowly. This will prevent
S
uncontrolled movements from occurring.
Use the product in its original state without
S
undertaking any modifications.
Festo BAW−HSW−... 1009a English
instructionsEnglish
y
(A)
(B)
(C)
13