Festo BAW−HSW−10 Manual Del Usuario página 17

Fitting the electric components
Use proximity sensors for position sensing.
1. Fasten the proximity sensors:
2. Fasten the lines outside the area of movement of the
handling module.
S Secure the lines with the aid of cable straps, etc.,
Festo BAW−HSW−... 1009a English
SME/SMT−8 for sensing the waiting position in the
sensor rail 3 or alternatively in the groove 4 of the
actuating cylinder.
SME/SMT−8 for sensing the end position in the
sensor rail 3.
SME/SMT−10 for sensing the end position on the
swivel module 7 (on the back).
to the holders of the installation kit MKRP 6
(è catalogue specifications).
3
4
5
6
7
17