Cleaning Instructions; Back Assembly; Cover; Foam - Invacare InTouch Propel Manual Del Usuario

SECTION 4—MAINTENANCE

Cleaning Instructions

Back Assembly

Clean weekly with dampened cloth. Wipe entire surface.
Weekly visual inspection of parts including hardware, brackets, upholstery materials,
foams (if accessible), and plastics, for deformation, corrosion, breakage, wear or
compression.

Cover

CAUTION
Machine wash cold. Gentle cycle. Mild detergent. NO fabric softeners or bleach. DO
NOT machine dry. Air dry ONLY out of sun.

Foam

Replace back foam if it becomes contaminated because of incontinence. The back foam is
absorbent and cannot be cleaned.
WARNING
The cover is designed to protect the foam against a user's incontinence and to
provide fire retardant so the cushion must not be used without its cover. If the
cover is torn, it must be replaced.
Continued use with absent or damaged cover by an incontinent user can result in
severe skin irritation, infection, and other skin care issues.
™ ™ 16
InTouch Propel Back Part No 1143199