Publicidad
Step 12
Tap down with your
1
screwdriver and hammer.
G
Groove
D33
å
Pull the DRAWER FRONT BRACKETS (10G) apart and slide
them into the grooves in the DRAWER SIDES (D32 and D33).
You may need to gently tap them in with a hammer.
å
NOTE: The DRAWER FRONT BRACKETS are marked "RH" and
"LH" for easy identifi cation.
å
Fasten the DRAWER FRONT (G) to the DRAWER FRONT
BRACKETS (10G). Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
3
Hidden part using
recycled material.
Color may vary.
M63
Fasten the DRAWER BRACE (M63) to the DRAWER
å
FRONT (G). Tighten one HIDDEN CAM.
Page 16
D32
BLACK 9/16" LARGE HEAD SCREW
(8 used in this step)
Maximum
Arrow
210 degrees
Minimum
190 degrees
G
VIEW THE T-SLOT BOX VIDEO
2
D33
1S
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D729) into the
å
grooves in the DRAWER SIDES (D32 and D33 ) and
DRAWER FRONT (G).
4
D33
M63
å
Fasten the DRAWER BACK (D61) to the DRAWER
SIDES (D32 and D33) and DRAWER BRACE (M63).
Use fi ve BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
Repeat this step for the other drawer.
420545
With the palm of
your hand, tap
the DRAWER
BOTTOM down
into the groove.
D729
U n fi
n i s h
e d
s u r
f a c
e
G
D32
Start each screw a few turns before
completely tightening any of them.
30S
BLACK 1-9/16" FLAT HEAD SCREW
(10 used in this step)
D61
Be sure the
DRAWER
BOTTOM
D32
inserts into
the DRAWER
BACK groove.
www.sauder.com/service
Publicidad
