Priming And Adjustment Of Oil Pump - Ecoflam Multicalor 45 Manual De Instrucciones

420010239602 Multicalor 45 ÷ 140 PR/PR
EN
NOZZLE
GPH
4.00
4.50
5.00
5.50
6.00
6.50
7.00
7.50
8.00
9.00
9.50
10.50
12.00
13.80
15.30
17.50
19.50
21.50
SUNTEC AJ 6 C-C
5
SUNTEC
SUNTEC
4
2
VERIFY: - That piping system is perfectly sealed; - That the use of hoses is avoided whenever is possible (use copper
pipes preferably); - That depression is not greater than 0,45 bar, to avoid pump's cavitation; - That check valve is sui-
tably designed for the duty.
Before starting the burner, bleed the air in the pump through the gauge port. Fill the piping with light-oil to facilitate
the pump priming. Start the burner and check the pump feeding pressure. In case the pump priming does not take
place during the first prepurging, with a consequent, subsequent lock-out of the burner, rearm the burner's lock-out to
restart, by pushing the button on the control box. If, after a successful pump priming, the burner locks-out after the
prepurging, due to a fuel pressure drop in the pump, rearm the burner's lock-out to restart the burner. Do not allow the
pump to work without oil for more than three minutes.
NOTE: Before starting the burner, check that the return pipe is open. An eventual obstruction could damage the
pump sealing device.
NOZZLE OUTPUT
RETURN PRESSURE BAR
0 4,218
7,52 8,91
7,52 8,91
7,52 9,33
7,52 9,36
9,2 11,42
9,2 9,49
9,74 13,38
9,74 13,38
9,74 10,87
11,16 15
12 13,38
12,8 13,93
13,93 15
16,72 20
16,72 20
20,9 23,42
22,29 29,53
22,8 27,3
OUTPUT kg/h

PRIMING AND ADJUSTMENT OF OIL PUMP

3
1
6
5
1
TYPE : MONARCH F80-BPS
8,436 12,654 16,872
13 19
13 21,16
13,38 21,39
13,93 25,6
13,93 17,8 33,45
11,42 20 36,19
17,27 24,5
18,66 31,2 41,82
15,6 25,64 44,55
18,4 25,64 36,77
18,94 29,53
22,29 33,7 58,55
22,29 34
31,2 57,9 76,89
29,27 43,46 72,54
36,5 66,27
43,49 64,6 108,74
40,15 61,28
SUNTEC J 7 C-C
SUNTEC
2 3
20
PUMP PRESSURE
20 bar
CAPACITY kg/h
- 22,24
- 24,96
- 27,68
30 30,56
33,28
36,00
39 38,88
41,6
44,16
49,92
52,9 52,64
58,24
66,9 66,56
76,48
84,8
- 96,96
108,16
120 119,04
1 - INLET
2 - RETURN
4
3 - BLEED AND PRESSURE
GAUGE PORT
4 - VACUUM GAUGE PORT
5 - PRESSURE ADJUSTMENT
6 - TO NOZZLE
6