Siemens CBP Manual Del Usuario página 116

06.2005
9.2 Technical Data
Order number
Size (length x width)
Pollution degree
Mechanical strength
During stationary operation
- Deflection
- Acceleration
During transport
- Deflection
- Acceleration
Climate class
Type of cooling
Permissible ambient or coolant
temperature
- during operation
- during storage
- during transport
Permissible humidity rating
Designation
Encoder supply
Motor temperature sensing
A+, A- (sine)
B+, B- (cosine)
R+, R- (zero track)
C+, C- (1 sine / revolution)
D+, D- (1 cosine / revolution)
Cycle+, Cycle-
Data+, Data-
Supported protocols
Pulse encoder simulation
Tracks A+, A-, B+, B-, zero+, zero- RS422
Siemens AG 6SE7087-6NX84-0FF5
SIMOVERT MASTERDRIVES
SBM – Sensor Board Encoder / Multiturn (only for MASTERDRIVES Motion Control)
SBM:6SE7090-0XX84-0FD0
SBM2:6SE7090-0XX84-0FE0
90 mm x 83 mm
Pollution degree 2 acc. to IEC 664-1 (DIN VDE 0110/T1),
moisture condensation is not permissible in operation
Acc. to DIN IEC 68-2-6 (for correctly installed board)
0.15 mm in frequency range 10 Hz to 58 Hz
19.6 m/s² in frequency range > 58 Hz to 500 Hz
3.5 mm in frequency range 5 Hz to 9 Hz
9.8 m/s² in frequency range > 9 Hz to 500 Hz
Class 3K3 to DIN IEC 721-3-3 (in operation)
Natural-air cooling
0° C to +70° C (32° F to 158° F)
-25° C to +70° C (-13° F to 158° F)
-25° C to +70° C (-13° F to 158° F)
Relative air humidity
Table 9-1 General technical data
Value
5 / 7.5 / 15 V can be switched over, Imax = 390 mA
PTC / KTY
1 V (0.8 V ... 1.2 V)
SS
1 V (0.8 V ... 1.2 V)
SS
0,5 V (0.2 V ... 0.8 V)
SS
1 V (0.8 V ... 1.2 V)
SS
1 V (0.8 V ... 1.2 V)
SS
100 kHz ... 2 MHz, RS422
RS485
EnDat and SSI
Table 9-2 Technical data of the SBM
Option boards
≤ 95 % during transport and storage
≤ 85 % in operation (condensation not
permissible)
9-3