06.2005
8
SBR1/2 – Sensor Board Resolver (only
for MASTERDRIVES Motion Control)
8.1
Description
NOTE
Connectable
resolvers
Temperature sensor
Pulse encoder
simulation
Siemens AG
6SE7087-6NX84-0FF5
SIMOVERT MASTERDRIVES
SBR1/2 – Sensor Board Resolver (only for MASTERDRIVES Motion Control)
The SBR optional board (Sensor Board Resolver) enables a resolver to
be connected to the converter and inverter modules.
The SBR optional board is available in two versions:
♦ SBR1 Optional board for connecting up a resolver
♦ SBR2 Optional board for connecting up a resolver with additional
pulse encoder simulation
You can connect all standard 2-pole resolvers and resolvers with the
pole pair number of the motor to the optional board. Adaptation to the
different types of resolvers is effected on the optional board by
automatic adjustment of the signal amplitude and the sampling time.
As well as a resolver, you can connect a temperature sensor (either a
KTY or a PTC sensor) to the optional board for monitoring the motor
temperature.
As an option, the SBR2 optional board can be equipped with pulse
encoder simulation. This provides A+, A-, B+, B-, zero+ and zero-
signals according to the standard RS422 which can be picked up via an
additional front socket.
System connector
Fixing screw
Fig. 8-1
View of the SBR2
Option boards
Fixing screw
25-pole Sub-D connection
Resolver with KTY/PTC
Pulse encoder simulation
(only on SBR2)
8-1