Step 10A Install Overlay Panels - Monogram ZIP360NN Manual De Instrucciones

Installation Instructions - Standard Installation

STEP 10A INSTALL OVERLAY PANELS

Use rear holes to
secure trim
Install door and drawer panels:
• Open door to 90°. Remove the 8 Phillips head screws
from the door trim.
• Remove trim. Retain all screws.
• Slide overlay panel into the door trim.
• Secure the trim to the door using the screws removed
earlier.
31-1000451 Rev. 0
IF YOU ARE INSTALLING FRAMED PANELS,
GO TO STEP 10.
Door Trim
Refrigerator Door
• Follow the same procedures to install the second door
panel.
• For freezer drawer, once panel is installed, use all 8
screws holes to install the door trim.
21