Oven Control Functions; Setting The Oven Controls - Sears Kenmore 790.4043 Serie Manual De Uso

Oven Control Functions

rEAD THE InSTrUcTIOnS cArEfULLY BEfOrE USInG THE OvEn. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
Note: The graphics on your timer may not look exactly like those shown. This doesn't change the way it
operates.
BAKE PAD—Used
to select the bake
function.
Select BROIL PAD—
Used to select the
variable broil function.
TIMER SET/OFF PAD— Used to
set or cancel the minute timer. The
minute timer does not start or stop
cooking.
Setting Oven Controls
Note: The time of day must first be set in order to operate the oven.
To Set the Clock
when the range is first plugged in, or when the power supply to the range has been interrupted, the display will
flash "12:00".
1. Press .
2. Within 5 seconds, press and hold the
Changing the Temperature Display Mode
The electronic oven control temperature display mode was factory preset to display (Fahrenheit) °F oven
temperatures. note: Oven cooking temperatures may be set from 170°f to 500°f (76°c to 260°c).
To change the Temperature Display Mode to °C (Celsius) or from °C to °F (do not use Bake or Broil while
changing the Temperature Display Mode):
Select
Broil
1. Press & hold the
will show the current Temperature Display Mode whether set for F or C.
2. Press the key pad once to choose the (Fahrenheit) °F mode; or press the
(Celsius) °C mode.
3. After 5 seconds, the display will flash. To accept the change, wait 5 more seconds until the oven control beeps
once. To complete the change skip step 4 below, OR;
4. If at any time during the process of changing the Temperature Display Mode (F or C ) you decide the change
is not desired, press the
5. The display will then return to the time of day with any temperature display mode change you may have
requested.
Bake
Select Timer
Broil
Set/Off
CLOCK SET PAD—
Used to set the time
of day.
or
key pad for 6-8 seconds until F or C appears in the display. Note: At this time the display
STOP
Clear key pad before the oven control beeps once to cancel the process.
STOP
Clear
STOP/CLEAR — Used to clear any
function previously entered except the
time of day and minute timer. Push
STOP/CLEAR to stop cooking.
until the correct time of day appears in the display.
7
UP and DOWN
ARROW PADS— Used
along with the function
pads to select oven
temperature, time of
day and minute timer.
key pad once to choose the