BABYTREND PC12 Manual De Instrucciones página 3

ASSEMBLY
ASSEMBLING THE PORTABLE
CHAIR
1) • Unlock the arms of the chair and
pull the arms apart while lifting the
seat back (Fig. 1a).
• When the seat back and arms are
up, push the seat back down into
the seat until it is fully locked into
place (Fig. 1b).
HEIGHT ADJUSTMENT
2) • For the low position, keep the
feet in the locked position.
High Position
5
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Fig. 1a
Fig. 1b
Low Position
• For the High position, turn seat over and
unlock each foot, swing each foot into an
upright position (Fig. 2a), then, push each
foot down into the bottom of the seat until it
is fully locked into place (Fig. 2b).
ATTACHING BOOSTER TO A CHAIR
WARNING:
Always
secure the product on a chair
using the bottom and back
attachment straps. Never use
this product on a stool or
bench that does not have a
seat back.
WARNING:
Always
check security of fit to adult
chair before each use and any
limitations of the product.
To use the bottom straps:
3) • Place the portable chair onto a chair that
has a seat back with no armrest.
NOTE: Do Not use seat cushion
between booster to a chair.
• Wrap bottom straps around the bottom of
the chair. Buckle the straps making sure
you hear buckle *CLICK* closed (Fig. 3a).
• Pull the Free ends of the strap to firmly
tighten the portable chair to the chair
(Fig. 3c).
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
6