When Connecting To Separately Sold Power Amp - Pioneer AVH-P4000DVD Manual De Instalación

Connecting the units

When connecting to separately sold power amp

This product
Rear output or
subwoofer output
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
Blue/white (6*)
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect 6*
and 7* when Pin 5 is an antenna control type.
In other types of vehicles, never connect 6* and
7*.
When you connect the separately sold
multi-channel processor (e.g., DEQ-P6600) to
this unit, do not connect anything to the
speaker leads and system remote control
(blue/white).
When you connect the multi-channel processor
to this unit, refer to multi-channel processor's
installation manual for the connection method.
Note:
· Change the initial setting of this unit
(refer to the Operation Manual).
The subwoofer output of this unit is monaural.
8
Front output
Blue/white (7*)
Connect to auto-antenna
relay control terminal
(max. 300 mA 12 V DC).
Connect with RCA cables (sold
separately)
System remote control
Left

Front speaker


Rear speaker

or Subwoofer
Power amp
(sold separately)
Power amp
(sold separately)
Right

Front speaker


Rear speaker

or Subwoofer
Perform these connections when
using the optional amplifier.