Adjusting The Inclination Sensor - Hilti PD-C Manual Del Usuario

approved by Hilti for use with the product can be found at your local Hilti
Center or online at: www.hilti.com.

8.2.1 Adjusting the inclination sensor

8.2.1.1 Adjustment intervals
In order to achieve greatest possible accuracy when making inclination
measurements, the inclination sensor must be adjusted at regular intervals.
Adjustment is also necessary if the product has suffered an impact or has
been subjected to considerable temperature change.
8.2.1.2 Adjusting the inclination sensor
1. Select the option 'Settings' and 'Adjusting the inclination sensor' from
the 'Functions' menu.
2. Lay the tool on a flat surface with the display facing upwards.
3. Press the "Measure" button.
4. Rotate the tool, without lifting it off the surface, until it points in the
opposite direction.
5. Press the "Measure" button.
◁ The inclination sensor is adjusted.
9 Transport and storage
9.1 Transport
▶ To protect the PD-C while it is being carried or transported, regular
use of the belt bag (PDA 66) supplied by Hilti is recommended. A red
Hilti toolbox for the PD-C can also be bought as an accessory in some
markets.
▶ For orders, please contact Hilti or visit www.hilti.com.
9.2 Storage
▶ Do not put the tool into storage when wet. Allow it to dry before putting it
away.
▶ Observe the storage temperature limits for the equipment, which are given
in the Technical Data section.
▶ Check the accuracy of the equipment before it is used after a long period
of storage or transportation.
10 Disposal
Most of the materials from which Hilti tools and appliances are manu-
factured can be recycled. The materials must be correctly separated before
they can be recycled. In many countries, your old tools, machines or appli-
ances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti
representative for further information.
26 English