Basic Information Concerning Safety - Hilti PD-C Manual Del Usuario

2 Safety

2.1 Basic information concerning safety

CAUTION
Possible hazard or risk of electric shock or burning injuries! At-
tempting to remove the battery presents a risk of electrical hazards, e.g.
short circuiting, burning injuries and leakage of harmful substances.
▶ Do not attempt to open the product. Have the battery replaced only
by Hilti Service.
CAUTION
Possible hazard or risk of electric shock or burning injuries! Ingress
of liquids such as rainwater, dew or condensation, etc. into the product
presents a risk of electrical hazards, e.g. short circuiting, burning injuries
and explosion.
▶ Keep the product clean and dry at all times.
▶ Keep the hinged cover cap closed to prevent dampness entering the
interior of the product.
CAUTION
Possible hazards as result of short circuiting, overload and fire.
Possible hazards due to heat radiation, ejection of molten material or
chemical reactions caused by short circuiting, overloading or through
resulting fire.
▶ Do not expose the product to high temperatures or fire. The battery
contained in the tool could explode or release toxic substances.
▶ Use only the approved USB AC adapter with standard micro-USB
cable.
▶ Under abusive conditions, liquid may be ejected from the battery.
Avoid contact with this liquid. Rinse with water if contact occurs.
In the event of eye contact with the liquid, a doctor should also
be consulted. The liquid that leaks from a battery may cause skin
irritation or burns.
English 17